Electric Scooter Tyre Size & Official Spare Part Finder
Verified factory tyre dimensions, inner tube valve angles, tubeless rim compatibilities, and guaranteed official spare part lists across KuKirin, Dualtron, Xiaomi, Teverun, Ninebot, and Rovoron electric scooters.
Guaranteed Compatibility Standard: Every spare tyre and inner tube listed below is verified against factory schematics and Dublin workshop bench installations.
Professional Tyre Fitting & Puncture Repairs: Carried out in-house by certified technicians at our Dublin service centre: 157 Capel Street, Dublin 1 (D01 F5P1). Same-day walk-in puncture repairs, PMT radial installations, and solid tyre conversions.
Select Scooter Brand & Model
Choose your brand below, select your model from the list, or tap any vehicle in the quick directory to reveal guaranteed compatible spare parts.
KuKirin G2 Max
KuKirin • Official Factory Tyre SpecificationOfficial Spare Part Compatibility List (Guaranteed Fitment) 100% Bench Verified
The following replacement items are engineered and certified specifically for this vehicle chassis and wheel geometry:
Workshop Fitment & Installation Notes
- Pneumatic tubeless bead seats securely on 6.5-inch split or standard alloy rims.
- Inner tube installation requires 90-degree angled Schrader valve to prevent rim clearance interference.
- Apply tyre bead lubricant during mounting; seat with 50 PSI burst before reducing to riding pressure.
Performance Upgrades & Pressure Guidelines
- Compatible with PMT Italian competition radial tyres for superior wet Dublin tarmac grip.
- Riders under 70 kg: 42 PSI; riders 70–90 kg: 48 PSI; riders over 90 kg: 52 PSI.
- Always inspect tread wear indicators; replace tyres when center tread depth reaches under 1.5mm.
Quick Scooter Tyre Fitment Directory (12 Models Per Brand)
Complete directory of all documented models. Tap any vehicle to load its official tyre dimensions and guaranteed spare part compatibility list directly into the inspector.
KuKirin 13 Models
Dualtron (Minimotors) 12 Models
Xiaomi 12 Models
Teverun 12 Models
Segway-Ninebot 12 Models
Rovoron (Minimotors) 6 Models
NAMI 4 Models
Workshop Service & Repair Liability Disclaimer
Personal light electric vehicles (e-scooters, e-bikes, and e-mobility systems) operate under demanding mechanical stress and high electrical currents. Please review the following mandatory technical terms, risks, and liability limitations prior to booking or undertaking any workshop repair, diagnostic service, or component installation.
Pre-Existing Wear & Hidden Structural Stress
Vehicles presented for repair or assessment frequently have concealed collision history, frame fatigue, hairline stress fractures, stripped factory threads, or water ingress not readily detectable upon visual intake. Lifty Labs and its technicians accept zero liability for pre-existing structural flaws, seized or corroded fasteners, or secondary component failures revealed during diagnostic inspection, standard disassembly, or subsequent road testing.
High-Voltage & Lithium-Ion Battery Hazards
Lithium-ion battery packs (36V to 72V+) carry inherent risks of thermal runaway, internal short-circuiting, and chemical fire. Lifty Labs performs diagnostic health scans, exterior terminal repairs, and genuine OEM pack replacements only. In strict accordance with workshop fire safety standards, Lifty Labs strictly does not perform battery cell repacking, cell rebuilding, or internal spot-welding modifications. Any customer using unauthorized third-party fast chargers, modified wiring harnesses, or bypassed BMS systems assumes 100% personal liability for resulting thermal damage or fire.
Firmware, Speed Tuning & Aftermarket Modifications
Installing custom firmware (CFW), removing factory speed limiters, modifying P-settings, or fitting non-OEM high-amp controllers forces motors, batteries, and wiring looms to operate outside certified engineering tolerances. Lifty Electric accepts no liability for blown controller MOSFETs, melted motor phase connectors, BMS shutdowns, or component fires caused by modified vehicle electronics. Lifty Labs does not support or warrant vehicles modified to exceed statutory speed caps.
Mandatory Pre-Ride Safety Check & Operator Responsibility
Due to harsh road surface vibrations across Dublin, the vehicle owner is legally required to conduct a thorough pre-ride inspection before every trip. This includes verifying tyre pressures (cold PSI), tightening folding stem latches and wheel axle nuts, testing front and rear mechanical/hydraulic brake bite, and checking throttle return springs. Safe riding habits, helmet wearing, and strict compliance with the Irish Road Traffic (Electric Scooters and E-Bikes) Regulations 2024 remain the exclusive legal responsibility of the operator.
