Exact-size confirmation
PMT size and rim compatibility are checked.
Premium road and performance tyre fitment
PMT Electric Scooter Tyre Installation Dublin
Lifty Electric installs compatible PMT electric scooter tyres in Dublin after confirming tyre size, rim, clearance, vehicle setup and intended use.
PMT tyres are selected for specific road and performance applications, but brand name alone does not guarantee compatibility or the right compound for every scooter.
Reviewed by the Lifty Electric Workshop Team
•
Dublin e-mobility specialists
•
157 Capel Street, Dublin 1
Compound guidance
The intended road and performance use is considered.
Professional fitment
Installation and clearance checks take place in Dublin.
Workshop expertise
PMT tyre selection and installation checks
Size verification
Confirm the marked PMT size against rim and vehicle requirements.
Rim inspection
Check rim condition before mounting a premium tyre.
Compound and use review
Match available tyre characteristics to intended riding.
Tyre installation
Mount the confirmed compatible tyre using workshop equipment.
Clearance and rotation
Check brake, mudguard, cable and frame clearance.
Pressure and care guidance
Provide practical maintenance guidance for the selected setup.
Clear process
How PMT compatibility is confirmed
-
1
Send model and current tyre size
Include sidewall and wheel photos.
-
2
Confirm the PMT option
Lifty checks size, compound availability and suitability.
-
3
Book Dublin installation
Final rim and clearance checks are completed in the workshop.
Dublin City Centre workshop
Visit Lifty Electric on Capel Street
Contact the team before travelling so availability, parts and expected turnaround can be confirmed.
Dublin 1
D01 F5P1
Ireland 01 443 4946
Continue exploring
Premium and standard tyre support
Helpful answers
PMT tyre installation FAQs
Can PMT tyres fit every performance scooter?
No. Exact tyre size, rim, clearance and load requirements must match.
Are PMT tyres puncture-proof?
No. Pneumatic PMT tyres can still puncture and require correct pressure and maintenance.
Can Lifty recommend the correct PMT compound?
Lifty can discuss available options based on the scooter and intended use, subject to current stock and manufacturer specifications.
Official Legal & Technical Notice
Workshop Service & Repair Liability Disclaimer
Personal light electric vehicles (e-scooters, e-bikes, and e-mobility systems) operate under demanding mechanical stress and high electrical currents. Please review the following mandatory technical terms, risks, and liability limitations prior to booking or undertaking any workshop repair, diagnostic service, or component installation.
01
Pre-Existing Wear & Hidden Structural Stress
Vehicles presented for repair or assessment frequently have concealed collision history, frame fatigue, hairline stress fractures, stripped factory threads, or water ingress not readily detectable upon visual intake. Lifty Labs and its technicians accept zero liability for pre-existing structural flaws, seized or corroded fasteners, or secondary component failures revealed during diagnostic inspection, standard disassembly, or subsequent road testing.
02
High-Voltage & Lithium-Ion Battery Hazards
Lithium-ion battery packs (36V to 72V+) carry inherent risks of thermal runaway, internal short-circuiting, and chemical fire. Lifty Labs performs diagnostic health scans, exterior terminal repairs, and genuine OEM pack replacements only. In strict accordance with workshop fire safety standards, Lifty Labs strictly does not perform battery cell repacking, cell rebuilding, or internal spot-welding modifications. Any customer using unauthorized third-party fast chargers, modified wiring harnesses, or bypassed BMS systems assumes 100% personal liability for resulting thermal damage or fire.
03
Firmware, Speed Tuning & Aftermarket Modifications
Installing custom firmware (CFW), removing factory speed limiters, modifying P-settings, or fitting non-OEM high-amp controllers forces motors, batteries, and wiring looms to operate outside certified engineering tolerances. Lifty Electric accepts no liability for blown controller MOSFETs, melted motor phase connectors, BMS shutdowns, or component fires caused by modified vehicle electronics. Lifty Labs does not support or warrant vehicles modified to exceed statutory speed caps.
04
Mandatory Pre-Ride Safety Check & Operator Responsibility
Due to harsh road surface vibrations across Dublin, the vehicle owner is legally required to conduct a thorough pre-ride inspection before every trip. This includes verifying tyre pressures (cold PSI), tightening folding stem latches and wheel axle nuts, testing front and rear mechanical/hydraulic brake bite, and checking throttle return springs. Safe riding habits, helmet wearing, and strict compliance with the Irish Road Traffic (Electric Scooters and E-Bikes) Regulations 2024 remain the exclusive legal responsibility of the operator.
Statutory Limitation of Liability: To the maximum extent permitted under Irish and European Union law, Lifty Electric (Lifty Labs, 157 Capel Street, Dublin 1) disclaims all liability for indirect, incidental, punitive, or consequential damages, loss of vehicle use, personal injury, or third-party damage arising out of vehicle operation, post-service riding, pre-existing structural flaws, or unauthorized subsequent modifications. Submission of a vehicle for workshop service constitutes full acceptance of these terms.
